|
|
U-Cut-To-Fit Speedometer Cable Kits
Premium Teflon-lined housing with machined aluminum fittings. Inner cable and outer housing can be cut-to-fit. Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
Lokar speedometer cables are designed to work with any cable driven aftermarket speedometer gauges (such as auto meter, Stewart Warner, VDO, etc. ) or factory speedometer with a 5/8-18 male thread at the Speedo.
Lokar speedometer cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar kit) Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar kit. Customers must supply the Speedo gear and Speedo gear retainer clip.
All Lokar speedometer cables are seven feet (7') long and designed to be cut-to-fit. Additional length cable in black or stainless housing is available upon request for an additional charge.
Speedometer cables for some early Ford Speedos are available by special order. These speedometers must have a 3/4 x 20 female thread at the speedometer.
Chevy Black
|
Chevy Stainless
|
Transmount End Attachment
|
Speedo End Attachment
|
SP-1500U
SP-1502U
Early Ford SP-1504U
|
SP-1501HT
SP-1503HT
SP-1505HT
|
|
Part #
|
Price
|
Description
|
| SP-1500U
|
$60.04
|
BLACK HOUSING SPEEDOMETER CABLE KIT
|
| SP-1501HT
|
$95.70
|
STAINLESS STEEL HOUSING SPEEDOMETER CABLE KIT
|
| SP-1502U
|
$60.04
|
BLACK Ford SPEEDOMETER CABLE TRANS
|
| SP-1503HT
|
$95.70
|
Ford HI-TECH SPEEDOMETER CABLE TRAN
|
| SP-1504U
|
$60.04
|
EARLY Ford SPEEDOMETER CABLE BLACK HOUSING
|
| SP-1505HT
|
$95.70
|
EARLY Ford SPEEDOMETER CABLE STAINLESS HOUSING
|
Anchor-Tight Headlight Braid
No, this is not just another headlight conduit! It is Lokar's newest design technology for U-Cut-to-Fit, non-kinking stainless steel headlight braid. Designed with threaded steel stud, insuring that you won't experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit complete with two 12" flexible braided stainless steel Teflon-lined housings, threaded STEEL studs, aluminum fittings, aluminum grill shell washers and headlight wire.
HL-1900
|
|
|
Part #
|
Price
|
Description
|
|
HL-1900
|
$59.04
|
STAINLESS STEEL HEADLIGHT BRAID
|
U-Cut-To-Fit Cruise Control Cables (for use with Rostra Control Kits)
Lokar cruise control cable is for use with "Rostra" control kits. Kit includes 4' Teflon-lined stainless outer housing and 5' of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are "U- Cut- to - Fit" inside and outside of firewall. All aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs, part no. srk-4000.
Carbureted Cruise Control Kits
CC-1601HT - CC-1603HT
|
Tune-port Cruise Control Kits
CC-1600U - CC-1602U
|
Rostra Control
|
Part #
|
Price
|
Description
|
|
CC-1600U
|
$60.04
|
BLACK HOUSING CRUISE CONTROL CABLE
|
|
CC-1601HT
|
$60.04
|
STAINLESS STEEL HOUSING CRUISE CONTROL CABLE
|
|
CC-1602U
|
$60.04
|
BLACK HOUSING TUNED-PORT CRUISE CONTROL CABLE KIT
|
|
CC-1603HT
|
$60.04
|
STAINLESS STEEL HOUSING TUNED-PORT
|
|
|
