|
|
FLAMING-RIVER - RACK AND PINION - 5.0L MUSTANG
|
1979-1993 Manual Rack And Pinion Deluxe Installation Kit FR1890
Reduce weight and streamline engine compartment. This installation kit is a direct bolt-in replacement for the 79-93 5.0L Mustang. It eliminates the power rack, pump, pulley and rag joint for a total vehicle weight reduction of more than 30 lbs.
Provides smooth responsive vehicle steering. Ideal for drag race and street use.
The Kit includes:
Manual R/P FR1503 $259.00
High-performance, needle bearing U-joint shaft kit. Correct manual spline, eliminates the rag joint FR1504-M
Manual tie rod ends FR1603 $19.00
1979-1993 Manual Rack And Pinion Steering Geer FR1503
This new manual rack & pinion is a direct bolt-in replacement. Reduces vehicle weight by more than 30 lbs. while maintaining a smooth, responsive steering system.
The Flaming River manual rack features aluminum castings, two mounting holes and a chromed center tube.
This design weighs only 14 lbs. and streamlines the engine compartment.
Steering ratio (18:1) 3.75 turns lock-to-lock. Outer ends, and shaft kit (or adapter) required for installation.
1979-1993 Manual Rack And Pinion Steering Geer With Outer Ends FR1503-1
The 79-93 5.0L Mustang manual rack&pinion cannot be used without new manual outer ends .
This kit allows for cost-effective complete unit and ease of ordering.
Note: Shaft kit or adapter is also required.
$289.00
High Performance Shaft Kit FR1504-M (Manual) FR1504-P (Power)
This high performance shaft kit utilizes two smooth, needle bearing universal joints, a prefabricated shaft to bolt directly into the column and weldless intermediate shaft for easy installation.
This long-wearing design eliminates the rag joint for better steering response, streamlined appearance and improved header clearance.
An absolute must when using large tube headers. Available for both power and manual rack and pinions.
| FR1504M
|
79 Shaft Assembly (Manual)
|
$175.00
|
| FR1504P
|
79 Shaft Assembly (Power)
|
$185.00
|
1979-1993 Outer Tie Ends FR1603
New manual outer tie rod ends are required when installing a new manual rack and pinion. The existing power rack & pinion tie rod ends are a different length.
Flaming River manufactures the correct manual outer ends, complete with grease fitting, castle nut, and cotter pin.
Two required for installation.
1979 Forged Adapter Flange FR1604
This adapter can be used to install the manual rack and pinion using the power steering rag joint. The adapter bolts on to the bottom of the rag joint and accommodates the manual rack and pinion.
The primary disadvantage is that the steering response is not as positive.
We recommend FR1504M manual shaft kit.
| FR1604
|
Flange Adapter (5. L)
|
$72.00
|
1994-1995 Manual RP Installation Kit FR1892
This installation kit is a direct bolt-in replacement for the 94-95 5.0L Mustang without hydroboost (nonmodular motors).
Total vehicle weight savings of 30 lbs. off the front end where it counts most!
This kit includes a new manual rack and pinion featuring chromed steel center tube and aluminum housings, universal joint and outer tie rod ends.
| FR1892
|
94-95 Manual R/P Kit Non-Modular Motors
|
$474.00
|
| FR1892D
|
94-99 Mustang Rack w/FR1509M Shaft Kit
|
$599.00
|
| FR1892V
|
Vibration Upgrade of FR1892
|
$649.00
|
Quick Ration Rack And Pinion (15:1) FR1520
This quick steer unit is designed for the 5.0L (79-93) Mustang. It is ideal for road racing and other applications where a very responsive steering system is required.
The ratio of this manual rack and pinion is 15:1 which is 25% faster than a standard unit.3.3 turns lock-to-lock
Engine Torque Eliminator FR1520
This torque mount is designed to eliminate movement or twist of the engine due to torque levels. Stabilizes, improves reaction time consistency while reducing the risk of motor mount breakage.
Compatible with all engines-very popular for late model Mustang
| FR1520
|
79-93 Quick Ratio 5. L Manual R/P
|
$299.00
|
1994-1997 Late Model Power Shaft FR1509P (power) FR1509M (Man)
This shaft kit is a direct bolt-in replacement for the factory late model (94-97) 5.0L steering. Pyramid style, needle bearing universal joint.
Improves header clearance, only 1.5 inch diameter. Vibration dampener kit also available.
FR1509-VP
Power with vibration isolator.
FR1509-VM
Manual with vibration isolator
| FR1509M
|
94-97 Shaft Kit (Mnl)
|
$279.00
|
| FR1509P
|
94-97 Shaft Kit (power)
|
$279.00
|
| FR1509VM
|
94-97 Shaft Kit w/Vib. Resistor (Mnl)
|
$359.00
|
| FR1509VP
|
94-97 Shaft Kit w/Vib. Resistor (power)
|
$359.00
|
79-93 Outer Tie Rod Ends FR 1603
New manual outer tie rod ends are required when installing a new manual rack and pinion. The existing power rack & pinion tie rod ends are a different length.
Flaming River manufactures the correct manual outer ends, complete with grease fitting, castle nut, and cotter pin.
Two required for installation.
Rack & Pinion
| FR1501
|
71-72 Pinto Rack & Pinion
|
$265.00
|
| FR1502
|
74-78 Mustang Rack & Pinion
|
$229.00
|
| FR1502-5
|
Custom Shortened Mustang II Rack
|
$299.00
|
| FR1507-1
|
Omni Rack (Rear Steer)
|
$265.00
|
| FR1507-2
|
Long Omni R/P (45")
|
$265.00
|
| FR1507-3
|
Omni R/P (41.69" Rear Steer)
|
$265.00
|
| FR1507C
|
Omni Clamp w/Bushing
|
$39.00
|
| FR1507-5
|
Omni R/P w/Short pinion
|
$329.00
|
| FR1520
|
79-93 Quick Ratio 5. L Manual R/P
|
$299.00
|
| FR1504AL
|
79-93 Alum. Shaft Assembly (Mnl)
|
$195.00
|
| FR1504AL-P
|
79-93 Alum. Shaft Assembly (power)
|
$195.00
|
| FR1508
|
94-99 Mustang R/P (Non Modular Motors)
|
$359.00
|
| FR1509M
|
94-97 Shaft Kit (Mnl)
|
$279.00
|
| FR1509P
|
94-97 Shaft Kit (power)
|
$279.00
|
| FR1509VM
|
94-97 Shaft Kit w/Vib. Resistor (Mnl)
|
$359.00
|
| FR1509VP
|
94-97 Shaft Kit w/Vib. Resistor (power)
|
$359.00
|
Rack & Pinion Installation Kits
| FR1890
|
79-93 5. OL Mustang Installation Kit (Direct Bolt-In)
|
$449.00
|
| FR1890Q
|
79-93 Quick Ratio 5. L Manual R/P Kit
|
$489.00
|
| FR1890-E
|
Econo Install Kit '79-'93 Mustang
|
$369.00
|
| FR1890-EQ
|
Econo Mnl. Install Kit 79-93 Quick Mustang
|
$369.00
|
| FR1891
|
74-78 Mustang II Kit
|
$415.00
|
| FR1892
|
94-95 Manual R/P Kit Non-Modular Motors
|
$474.00
|
| FR1892D
|
94-99 Mustang Rack w/FR1509M Shaft Kit
|
$599.00
|
| FR1892V
|
Vibration Upgrade of FR1892
|
$649.00
|
Ultimate Chrome R & P (Triple-Plate Show Quality)
| FR1502C
|
Chrome Mustang II R/P
|
$699.00
|
| FR1502-5C
|
Chrome Mustang II w/Short Pinion
|
$699.00
|
| FR1507-2CH
|
Chrome Omni R/P
|
$699.00
|
| FR1507-5C
|
Chrome Omni w/Short Pinion
|
$699.00
|
Custom Rack and Pinions
| FR1501-S*
|
Custom Shortened Pinto R/P
|
$549.00
|
| FR1502S*
|
Custom Shortened Mustang II R/P
|
$449.00
|
| FR1502-5S*
|
Custom Shortened Mustang w/Short pinion
|
$519.00
|
| FR1507-1C*
|
Custom Shortened Omni R/P
|
$549.00
|
| FR1507-5S*
|
Custom Shortened Omni w/Short pinion
|
$599.00
|
Rack and Pinion Accessories
| FR1501B
|
Pinto Replacement Bellows (Pr)
|
$39.90
|
| FR1502B
|
Mustang Replacement Bellows (Pr)
|
$39.90
|
| FR1600
|
Mounting Bushing for FR1502 (Ea) Two (2) req. for installation
|
$10.00
|
| FR2001
|
Two Piece Bushing (Pr)
|
$12.00
|
| FR1601
|
Outer End for Mustang II Two (2) req. for installation
|
$18.00
|
| FR1604
|
Flange Adapter (5. L)
|
$72.00
|
| FR1510
|
2" Rack Extender Kit (Truck)
|
$89.00
|
| FR1511
|
4" Rack Extender Kit (Truck)
|
$89.00
|
|
|
